High-rise residential

  • This wheel selection is fully customizable from 300 mm to 3000 mm by 1 mm increments
  • Four different aluminum-sheet thicknesses can be combined to four different spacing and four different coating for endless performance possibilities
  • Canvas-type contact seal provides very low-leakage rates and cross-contamination
  • Enclosed-bearing for durability and reliability
  • Inverter duty-motors with self-adjusting belt tensioning. Motors sizes are very small to minimize electricity consumption.

BC-ECW-CTW150

BC-ECW-CTW150
High-rise residential
Customizable energy recovery units
Indoor or outdoor installation

Air: 2000 /2000 PCM

 

BC-ECW-CTW150   Télécharger le PDF     Voir nos réalisations     Documentations

FEATURES OF THIS UNIT

  • 2000 CFM FA & EA
  • 150MBH gas-fired heat exchanger in 304L SS
  • Multi-stage modulation 12:1 turndown
  • Outdoor construction
  • Wheel is vertically installed with side-by-side air-flows
  • Horizontal end discharge exhaust
  • Two fresh-air inlets with hoods
  • Hinged-doors with ¼ turn lockable handles
  • Welded frame and lifting lugs
  • Galvanized construction 2’’ double-wall (18G/22G)
  • 3.5Lbs/cu-ft rock-wool insulation
  • Minimized thermal-bridge construction
  • Enamel paint with epoxy primer
  • Aluminum low-leakage insulated dampers
  • Heated controls enclosure
  • Flat-roof with standing seams
  • DWDI FC fans on supply and exhaust
 

ALUMINIUM ENERGY RECOVERY WHEEL WITH MODULAR FRAME DESIGN

  • This wheel selection is fully customizable from 300 mm to 3000 mm by 1 mm increments
  • Aluminum-wheel and frame construction
  • EATR of less than 1%
  • AHRI certified performances
  • Inverter duty-motor