Recovery

  • Energy recovery wheel housing with driving belt and flexible canvas gasket
  • Counter-flow heat exchanger 80 to 90% efficiency and up to 10,000 CFM
  • This product is especially designed for a quick unit selection and integration inside one of our units with fully customizable dimensions
  • High efficiency motor controlled by frequency inverter
  • Gaskets between the two air-flows with flexible low-leakage rates gaskets
  • Wrap around heat pipe heat exchanger for pre-cool and post-heat
  • 3 Ängstrom total energy recovery-wheel to minimize cross-contamination
  • Heat-pipe heat exchanger almost any CFM range
  • Surface view showing the recovery wheel's precision of their construction
  • Coil type recovery-heat exchanger for run around loops
  • Polymer-plate heat exchanger for very corrosive environments
  • This product is especially designed for customization and integration into our units
  • Cross-flow stainless-steel heat exchanger for corrosive environments
  • This product is especially designed for customization and integration into our units
  • Enthalpy-plate heat exchanger recovers sensible and latent energy. They are customizable from small to 20,000 CFM

recovery

ENERGY RECOVERY PRODUCTS 

Air-to-air energy recovery is the art of transferring energy from the exhausted airstream to the entering fresh air-stream. Many different types of energy recovery cores exist that can exchange sensible only or both sensible and latent energy.

In air-to-air HVAC applications, energy can be recovered from general building exhaust or low temperature processes. We can incorporate wheels, plates, heat pipes or mainstay run-around loop.

APPLICATIONS

  • Warehouses
  • Industrial and heavy duty applications
  • Paint booths
  • Welding workshops
  • Underground parking lots
  • Mechanical workshops
  • Schools & gym
  • Multi-use facilities
  • Factory
  

APPROVALS

  • CSA for installation in Canada or the United States according to the ANSI-UL 1995-3rd/CSA C22.2 standards
  • City of New York # MEA-65-01E.
  • State of Massachusetts Plumbing gas code CMR 248

This product is designed to be flexible in construction. We offer a multitude of factory standard or made-to-measure options to satisfy your project needs.

 

OPTIONS FOR THE BC-ENERGY RECOVERY PRODUCT LINE CORES

  • Sensible only or latent & sensible wheel media
  • Plate heat exchanger
  • Heat pipes
  • Run-around loops
  

CABINET CONSTRUCTION

  • Sloped roof
  • Stainless steel 304 or 316 construction
  • 4’’ insulation 1.5 to 4.0lbs/cu*ft
  • 16G/20G double-wall construction
  • NEMA 12 or 4x construction
  • Walk-in vestibule

OPTIONAL COMPONENTS

  • Variable volume with VFD
  • Direct or indirect-fired heat exchangers
  • DX or chilled water cooling coils
  • Hot water heating coil
  • Package cooling with split condensing unit
  • FM or IRI gas piping
  • Backward inclined, direct drive fans or fan array
  

CONTROLS

  • Frost control with VFD, preheat or by-pass
  • PLC controls and BacNet protocol
  • Wall mount controls
  • Over under or side by side unit arrangement
  • And much, much more...

 

ENERGY RECOVERY WHEEL WITH FULLY CUSTOMIZE DIMENSION FROM 300mm TO 8000mm

This product is especially designed for a quick unit selection and integration inside one of our units with fully customizable dimensions.

Energy recovery wheel with fully customizable dimension from 300mm to 8000mm

  

CHARACTERISTICS

  • Aluminum wheel and frame construction
  • Enclosed bearings for durability
  • Canvas type contact seal for lowest leakage in the industry
  • AHRI certified performances
  • Small motor sizes with self adjusting belt tensioner
  • Wheel size is customizable in 1mm increments,
  • 4 different aluminum sheet thicknesses available,
  • 4 different flute spacings are available,
  • 4 different coatings are available to maximize
  • Performance and minimize pressure drop.

CROSS-FLOW PLATE HEAT EXCHANGER WITH CUSTOMIZABLE DIMENSION FROM 1000 TO 60,000CFM

  

CHARACTERISTICS 

  • Aluminum corrugated plate construction for durability
  • No moving parts for low maintenance
  • Close to zero leakage rate (virtually no cross-contamination)
  • Epoxy coating for corrosive environments
  • AHRI certified performances
  • Plates are made from 599 to 1994 mm (23.6’’ to 78.5’’) sides for low to high airflows
  • Plate spacing is available from 6 to 20 mm (0.79’to .248’’) for more flexibility
  • Plate width can be from 127 to over 5080mm (5’’ to over 200’’)